1991 isuzu pickup swap
Thread Starter
TECH Enthusiast
iTrader: (5)
Joined: Feb 2005
Posts: 538
Likes: 0
From: Germantown, MD
1991 isuzu pickup swap trying to find out if anyone has done a lsx swap in one of these trucks and if so let me get some info
i just bought a short bed 91 5speed and 2.3l with 65000 miles for 300 dollars from my friend and want to do an lsx swap i have been trying to look around and havent found anything..
i just bought a short bed 91 5speed and 2.3l with 65000 miles for 300 dollars from my friend and want to do an lsx swap i have been trying to look around and havent found anything..
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
From Wikipedia:
"In North America, the Isuzu TF appeared in 1987 as simply the "Pickup", replacing the Japanese-made P'up (KB-Z). Isuzu continued on with the TF until 1996 when it was finally replaced with the Hombre (badged-engineered S-10) in 1996. The only engines available were the 2.3L 4ZD1, and the 2.6L 4ZE1 on four-wheel drive models."
I'd look around and see if anybody has done a swap into an Izusu Amigo/Rodeo. They use similar underpinnings as your truck.
"In North America, the Isuzu TF appeared in 1987 as simply the "Pickup", replacing the Japanese-made P'up (KB-Z). Isuzu continued on with the TF until 1996 when it was finally replaced with the Hombre (badged-engineered S-10) in 1996. The only engines available were the 2.3L 4ZD1, and the 2.6L 4ZE1 on four-wheel drive models."
I'd look around and see if anybody has done a swap into an Izusu Amigo/Rodeo. They use similar underpinnings as your truck.
Thread Starter
TECH Enthusiast
iTrader: (5)
Joined: Feb 2005
Posts: 538
Likes: 0
From: Germantown, MD
its a 1991 isuzu pick up 2wd 2.3l short bed 5speed truck with front torsion bars
i was doing some measuring and the tunnel and engine bay seem to have enough room to fit an ls1-2 w/ a t-56 rear end still thinking of what to use ?
making motor mounts fit right i think is going to be the hardest part of this swap
i was doing some measuring and the tunnel and engine bay seem to have enough room to fit an ls1-2 w/ a t-56 rear end still thinking of what to use ?
making motor mounts fit right i think is going to be the hardest part of this swap
