Are the following mods for a Z06 Vette good or is the cam to big?
Thread Starter
Teching In
Joined: Jun 2009
Posts: 32
Likes: 0
Are the following mods for a Z06 Vette good or is the cam to big? Here is a list of the mods that are on the car? The reason I'm asking if they are good or bad (mainly the cam) is becuase I am looking at purchasing the car and want to make sure that the cam isn't to big for the current mods. Also with this setup should the fuel economy still be close to stock?
The car is a M6 Z06
Thunder Racing camshaft (Rapture P7215) duration 236/242 lift 617/613
Hardened push rods
SLP longtube headers
Custom X-pipe
Corsa exhaust system
Carbon fiber ram air intake system
Ported and polished heads
Pro performance springs an seals
Custom dyno tuned (pushes approx 490hp)
WET nitrous kit is 3/4th the way installed-250hp kit
The car is a M6 Z06
Thunder Racing camshaft (Rapture P7215) duration 236/242 lift 617/613
Hardened push rods
SLP longtube headers
Custom X-pipe
Corsa exhaust system
Carbon fiber ram air intake system
Ported and polished heads
Pro performance springs an seals
Custom dyno tuned (pushes approx 490hp)
WET nitrous kit is 3/4th the way installed-250hp kit
Thats a healthy cam, but not too big since the heads are done and it has a good exhaust.
Secondly, no .... the fuel economy will not be close to stock. It won't be too horrible if you keep your foot out of it. If your looking for fuel economy, a sports car is probably not what you're looking for.
The car sounds like it was done right. It's got some decent parts on it. If it were me, I would have already bought it. LOL
Secondly, no .... the fuel economy will not be close to stock. It won't be too horrible if you keep your foot out of it. If your looking for fuel economy, a sports car is probably not what you're looking for.
The car sounds like it was done right. It's got some decent parts on it. If it were me, I would have already bought it. LOL
