went from loudmouth to magnamouth. BIG disapointment
Maybe you just went with the wrong muffler. After I installed my cam, headers & ORY, I replaced the SLP resonator with a Magnaflow bullet muffler & it's still loud as hell, but just eliminated most of the rasp (only time is 2500-2800 RPM under light load).
Here is the one I used: http://www.summitracing.com/parts/MPE-14419/
Unfortuately I don't have any new video clips of what it sounds like when I'm driving, but at WOT you can hear me from a mile away.
Shay
Here is the one I used: http://www.summitracing.com/parts/MPE-14419/
Unfortuately I don't have any new video clips of what it sounds like when I'm driving, but at WOT you can hear me from a mile away.
Shay
TECH Apprentice
Joined: May 2006
Posts: 361
Likes: 0
From: South Florida
before u up and waste money changing it let it be for a month or 2. Magnaflow tends to get louder as you put miles on it. I have true duals on my car and bought 2 magnapacks for it. Put em on and loved the way it sounded but it was to quiet so I put my 40 series slowmaster back on and went about my business. Eventually I wanted to lower the car back down again so i put the magnaflow back on and had the exhaust guy tuck them up good. Been driving it for a couple months now and it's louder than my flowmaster was. And it sounds **** by the way
I had the slp LM1 with my current set-up and it was VERY LOUD and VERY RASPY. I changed it to the Magnaflow CB and its a lot quieter but I dont really like the sound all that much. It sounds sorta stock but I can live with it. Here is a sound clip of my Magnaflow
http://www.youtube.com/watch?v=0qayOVVtKOo
I just put on a DMH e-cutout as well
http://www.youtube.com/watch?v=0qayOVVtKOo
I just put on a DMH e-cutout as well
Man get a dual exhaust custom made and dump it at the rear axle, I was just in your same shoes. With my cut out closed my Bassani x pipe dual exhaust felt to quiet, with dual cut outs it was so loud I would set car alarms from 100 feet away. So I had them cut the over the axle part off and weld on two glass packs and the sound is freakin MEAN and perfect. Loud all the time, but you can still hear the music.
check out some sound clips and find something better...not like it gets any worse
loudmouths sound ok on a stock car, but with headers they start to sound pretty bad and obnoxious
loudmouths sound ok on a stock car, but with headers they start to sound pretty bad and obnoxious
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
My Magnaflow took some time to break in. When I first put it on, it was very quiet and my car seemed slower. After a few days the sound really opened up and it sounded much better.
I know someone else already asked this but I never saw a answer. What cam do you have in this car? In your sig there is no sign of you having a cam but you did say that you couldnt tell you had a cam after you changed the muffler.
Registered User
Joined: Oct 2009
Posts: 2
Likes: 0
From: Coeburn, Va
your problem being... you put a muffler on your car!!! hahahaha a loud mouth exhaust is pretty much no muffler.. the lil resignator they give you is nothing.. just looks like a muffler, if you look inside it there is nothig!! less than what you bolted back on hands down hence its quiter now, youll probaly see in new "muffler" theres dimples, or hell even chambers, all in all cant get louder than a loud mouth unless open headers, seeing a loud mouth does nothing to quiet exhaust noise, at end of y-pipe back 
I have LT's, ory and a Magnaflow. It doesn't drone or rasp at all really. I like that its fairly quiet and doesn't draw too much attention.
I do like loud, but not all the time. So that's why I put a cutout in.
I do like loud, but not all the time. So that's why I put a cutout in.
Funny you guys talk about your exhausts being so quiet you cant hear them... My flowmaster 80 on my six is freakin loud all the time. I cant imagine anything on your v8's.
I'll be going to a v8 takeoff catback next since I have an electric cutout. Its nice being loud and/or stock quiet when you wanna be.
I'll be going to a v8 takeoff catback next since I have an electric cutout. Its nice being loud and/or stock quiet when you wanna be.
Funny you guys talk about your exhausts being so quiet you cant hear them... My flowmaster 80 on my six is freakin loud all the time. I cant imagine anything on your v8's.
I'll be going to a v8 takeoff catback next since I have an electric cutout. Its nice being loud and/or stock quiet when you wanna be.
I'll be going to a v8 takeoff catback next since I have an electric cutout. Its nice being loud and/or stock quiet when you wanna be.
Its loud because you dont have enough exhaust pressure to use the muffler as it was designed.
Finally got a clip for you. The camera guy was about 6-8 feet back & said it hurt his ears when a gave it a rev. Sounds pretty damn loud to me.
Btw, I had to launch easy due to **** poor traction.
http://www.youtube.com/watch?v=-OXq2XXWZCg
Shay
Sounds pretty damn loud to me.Btw, I had to launch easy due to **** poor traction.
http://www.youtube.com/watch?v=-OXq2XXWZCg
Shay
I have ms3 and i updated my sig now. after having it on there for a few weeks i guess i got use to how it sounds. i just wanted the high performance sound and not the over whelming noise from lm. also might help if i get it tuned, havent done that since the heads and cam swap but ohh well its winter so i might as well wait till summer