header install!!!!!!!!
1. Soak all bolts with PB Blaster the night prior to removal
2. Pick up an extra 02 sensor in case one of the OEM sensor's is cross threaded.
3. Use OEM gaskets for best results.
4. Secure the steering wheel (ignition lock or bungee cord).
5. Mark steering rack alignment with an awl/screwdriver - it will help with proper alignment when you bolt it back into place.
6. If your headers are coated, wrap them in plastic wrap (available at Lowes). This will help keep the coating from getting nicked up during install.
7. A crowsfoot wrench (16MM & 19MM) are handy for the PS lines
Research first, take your time, and enjoy!
Trending Topics
The Best V8 Stories One Small Block at Time
because the first version had fitment issues...
It took me four hours to do mine...
make sure you cut down the two bolts on the passengers side
inner fender before you install them...
Take your time, have a few beers and have some fun.....it'll be worth it in the end...
Last edited by crakhead; Nov 29, 2009 at 10:34 PM.






