Looking For WS6 Cowl Hood Pics
Looking For WS6 Cowl Hood Pics Like the title says...I want to see what the VFN cowl WS6 hoods look like on cars at different angles....if you have a pics please post it up...
-Dave
-Dave
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
agreed, it looks ridiculous. maybe with a big block in the car, and a high rise single plane with a dominator on top it would be acceptable, but on the street, nooo. Might as well put one of those 2 foot wings on top of the Spoiler too. but hey to each his own.
I'll have to put a pic of the sloped 5 inch cowl I have from VFN. It's not shaped that way at all, and comes right up to the windshield, like it should.
I haevn't mounted it yet, but you can get the idea.
I haevn't mounted it yet, but you can get the idea.
It's sitting on my car at home. I'll try to get some pictures of it this weekend, you can tell it does fit pretty good, and should mount up nicely.
You'll have to lose the cowl plastic, and the wipers with it, but if that's o.k. it's probably the best looking hood other then the Joe van overton hood, which is about 3 times the cost, and takes forever and a day to get.
You'll have to lose the cowl plastic, and the wipers with it, but if that's o.k. it's probably the best looking hood other then the Joe van overton hood, which is about 3 times the cost, and takes forever and a day to get.
It's sitting on my car at home. I'll try to get some pictures of it this weekend, you can tell it does fit pretty good, and should mount up nicely.
You'll have to lose the cowl plastic, and the wipers with it, but if that's o.k. it's probably the best looking hood other then the Joe van overton hood, which is about 3 times the cost, and takes forever and a day to get.
You'll have to lose the cowl plastic, and the wipers with it, but if that's o.k. it's probably the best looking hood other then the Joe van overton hood, which is about 3 times the cost, and takes forever and a day to get.
-Dave
Kind like this? I dont really have any side pictures to give it the profile but the bulges have a nice smooth transition. the wing tips needed some extensive modification to sit down flush.
EDIT: found some more.
Last edited by Tricked-Out-Toy; Nov 12, 2009 at 07:32 AM.