Carb intake,pic request.
Thread Starter
Joined: Feb 2004
Posts: 1,131
Likes: 4
From: Franklin MASS
Carb intake,pic request. I am running a carb style intake on my new motor. Its a GMPP with an aarons intake elbow, on a set of LS7 heads. Question is what is everyone doing for an air filter off the TB? I wont be running a MAF, and would like to still use my FIPK filter. I was thinking of using a 4" piece of exhaust pipeing with some silicone couplers. Anyone have any ideas, maybe a pic or 2? Thanks in advance
Rob
heres a couple pics:
Rob
heres a couple pics:
Thread Starter
Joined: Feb 2004
Posts: 1,131
Likes: 4
From: Franklin MASS
thanks for the pic, i may end up doin that, which filter is that?
i will check that out, thank you
i will check that out, thank you
K&N Part #RU-3480
It has a 4.5" flange. Depending size of the mouth of your throttle body, you might need a different size flange. You can search filters by dimensions at K&N's web site:
http://www.knfilters.com/search/universal.aspx
It has a 4.5" flange. Depending size of the mouth of your throttle body, you might need a different size flange. You can search filters by dimensions at K&N's web site:
http://www.knfilters.com/search/universal.aspx
I have 2 45* spectre 4 inch tubes clamped together that connects to my airlid. I had the same setup on my old edelbrock elbow. Look in my signature for detailed pictures of it.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo Thread Starter
Joined: Feb 2004
Posts: 1,131
Likes: 4
From: Franklin MASS
thanks for the input everyone. I am pulling my manifold off today, and bringing it to a friend of mines house so he can fab up some fuel ;rail brackets, and a throttle cable bracket. I cant do too much on it, broke my hand last week, so he's going to help me out. I am leaning towards just throwing a filter on there like Skinny did. But I am going to check out home depot today for that fernco, thanks again!
not an ls1 but here is my LT1 motor which is setup similar only using an accufab 4 barrel throttle body and a victor EFI manifold...
3.5" tubing tig welded down to behind the pass side headlight and a 9" conical K&N underneath the car where the coolant overflow tank used to be. fits PERFECT. the hat is a blow thru carb hat from procharger..
3.5" tubing tig welded down to behind the pass side headlight and a 9" conical K&N underneath the car where the coolant overflow tank used to be. fits PERFECT. the hat is a blow thru carb hat from procharger..
