FS / Trade: Ported LS Victor JR with Rails and 4150 TB
Thread Starter
TECH Enthusiast
iTrader: (68)
Joined: Nov 2004
Posts: 707
Likes: 0
From: Cleveland, TN
Back to the top.
For the people asking about the coil pack setup. I would to trade this setup for a valve cover mounted set with spark plug wires, for my complete setup with the long wires.
For the people asking about the coil pack setup. I would to trade this setup for a valve cover mounted set with spark plug wires, for my complete setup with the long wires.
10 Second Club
iTrader: (12)
Joined: Jun 2005
Posts: 805
Likes: 1
From: Arlington, Texas (Dallas Area)
I have some questions. Would you mind PM'ing me? Thank you.
1) I have a FAST 90/90 unported set-up. Would you be interested?
2) Why did you decide to go another route on the set-up? What are your plans instead of using the Victor set-up?
3) Have you had any sensor issues or tuning issues with this set-up?
4) Would they have any issues sealing on the AFR 205 heads?
5) I've just started researching this set-up. Do you have to run the wires, etc. to the front like that? I guess I have not pictured where my coil packs would be yet. I'm trying to look at the whole picture.
6) Was your set-up on NA or Power Adder?
1) I have a FAST 90/90 unported set-up. Would you be interested?
2) Why did you decide to go another route on the set-up? What are your plans instead of using the Victor set-up?
3) Have you had any sensor issues or tuning issues with this set-up?
4) Would they have any issues sealing on the AFR 205 heads?
5) I've just started researching this set-up. Do you have to run the wires, etc. to the front like that? I guess I have not pictured where my coil packs would be yet. I'm trying to look at the whole picture.
6) Was your set-up on NA or Power Adder?
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo Thread Starter
TECH Enthusiast
iTrader: (68)
Joined: Nov 2004
Posts: 707
Likes: 0
From: Cleveland, TN
I have some questions. Would you mind PM'ing me? Thank you.
1) I have a FAST 90/90 unported set-up. Would you be interested?
2) Why did you decide to go another route on the set-up? What are your plans instead of using the Victor set-up?
3) Have you had any sensor issues or tuning issues with this set-up?
4) Would they have any issues sealing on the AFR 205 heads?
5) I've just started researching this set-up. Do you have to run the wires, etc. to the front like that? I guess I have not pictured where my coil packs would be yet. I'm trying to look at the whole picture.
6) Was your set-up on NA or Power Adder?
1) I have a FAST 90/90 unported set-up. Would you be interested?
2) Why did you decide to go another route on the set-up? What are your plans instead of using the Victor set-up?
3) Have you had any sensor issues or tuning issues with this set-up?
4) Would they have any issues sealing on the AFR 205 heads?
5) I've just started researching this set-up. Do you have to run the wires, etc. to the front like that? I guess I have not pictured where my coil packs would be yet. I'm trying to look at the whole picture.
6) Was your set-up on NA or Power Adder?
