Originally built by Wheel 2 Wheel Powertrain, just freshened by Shawn at Virginia Speed.
GM Racing C5R block 4.125" bore with bushed lifter bores
Callies Magnum 3.625" Crank
JE pistons with coated tops and skirts
Oliver 6.125" HD billet steel rods with optional pin forced oiling tubes
Coated Clevite bearings
Total Seal rings
A1 Technology head and main studs
8.3:1 CR with 70CC combustion chambers
Short Block is still at VA Speed and will be ready to bolt heads on and go, meticulously inspected and assembled with fresh components.
This is an extreme duty aluminum block boost ready engine. This is one of 2 C5R race engines I own, and have no need for this one.
$8000

I also have other top shelf race parts that can be added but are not included.
Custom 5/16" Smith Brothers 9.015" pushrods $50
Jesel drop in style LS1 solid roller lifters $2200 new, SOLD
Custom W2W Cam Motion solid roller cam $250
263.6 Intake - 258 Exhaust .726" - .727" 116* LSA +6* Advanced

Also for sale.....
ETP 265 complete heads! Fully upgraded with these options from ETP.......
Inconel Exhaust valves 1.60"
Titanium Intake Valves 2.10"
PSI 1224 upgraded springs
Copper seat upgrade
Jesel J2K ETP 265 specific rocker set
Very few passes, excellent condition, and ready to go!

Over $6,000 in receipts
Sell for $3,500 or will make a combo deal with the 388ci C5R shortblock I have for sale.

Also have a pair of 98-02 Trans Am headlight assemblies complete with motors. Both work excellent.
Passenger side was purchased new from GM with less the 3000 miles $300
Drivers side is original 2002 TA, it had a crack in the outer frame that was repaired a couple of years ago, and does not effect performance or appearance at all. $250

Also have a pair of rear Bogart bolted RT's 15X10 with 7.5" backspacing. Like new with 6 passes on them. Hoosier 325-50-15 Drag Radials mounted on them. $800
93-02 F-body Wiper assembly with motor $40

Midwest Chassis Fab 9" housing, 35 spline Moser axles and GM LS1 rear brakes.
$1500

 

PM me with any questions.

 

PM's replied.

 

Ttt!!!

 

Bump!

 

Jesel lifters are sold. All else still available.

 

Ttt!!!!

 

Bump!

 

Ttt!!!!!!

 

Also have a pair of 98-02 Trans Am headlight assemblies complete with motors. Both work excellent.
Passenger side was purchased new from GM with less the 3000 miles $300
Drivers side is original 2002 TA, it had a crack in the outer frame that was repaired a couple of years ago, and does not effect performance or appearance at all. $250
Also have a pair of rear Bogart bolted RT's 15X10 with 7.5" backspacing. Like new with 6 passes on them. Hoosier 325-50-15 Drag Radials mounted on them. $800
93-02 F-body Wiper assembly with motor $40

 

Bump!!!

 

To The Top!!!!

 

More parts added to original post.

 

Threads merged with a new title. All stuff is still available.

 

a lot of good parts here!!!

 

This a smokin deal on this stuff!

 

PM's returned.

 

Does the rear end include the torque arm?
Backbrace?
4 channel for abs and tcs?

 

I had a custom Midwest torque arm built to clear my Strange Ultra case center section. I will keep that and the anti roll bar in the pics. A new MWC torque arm is under $500.
It is backbraced.
I did not run abs, but it can be easily added.

Here it is when I unpacked it. There is under 200 miles on it now.
This one of a kind with tow bar, and wheelie bar mounts, oil fill cap, transverse shock mounts and backbrace.

 

Will those etp fit a 4.030 bore