LS1TECH - View Single Post - how to make ta fog lights stay on w/ hi beam?

Paul Bruno · 02-07-2002, 11:18 PM

This is one way we use to do it on the Grand Prix

The factory fog lights are wired to their own relay, except the ground wire is run through the high beam relay. When the brights come on the fogs are no longer grounded so they turn off.

Bend the ground plug on the relay up, connect a wire to it, then attach the other end of the wire to the car body somewhere.

[ February 07, 2002: Message edited by: Paul Bruno ]</p>

02-07-2002, 11:18 PM	#5
Paul Bruno Teching In Trader Rating: 0 Join Date: Jan 2002 Location: BX NY Posts: 3	Re: how to make ta fog lights stay on w/ hi beam? This is one way we use to do it on the Grand Prix The factory fog lights are wired to their own relay, except the ground wire is run through the high beam relay. When the brights come on the fogs are no longer grounded so they turn off. Bend the ground plug on the relay up, connect a wire to it, then attach the other end of the wire to the car body somewhere. [ February 07, 2002: Message edited by: Paul Bruno ]</p> __________________ 2k2 NBM WS6 A4 TCS