short shifters
Originally Posted by camarosslover21
yeah I have the stock hurst shifter. I heard thought that the b&m shifter was good so I was thinking about getting that one. wat do you think??
I HAVE THE B&M I LIKE IT...JUST MAKE SURE U GET A SHORT STICK..I CUT MY SO IT BETER...
Trending Topics
Hurst Billet Plus.. or Pro 5.0.. i have used the Hurst for years.. loved it.. I am using the pro 5.0 in stock formation on my 98 LS1.. love it too.. had B&M.. was ok.. I like the more notchy feeling with the Hurst and Pro 5.0
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Originally Posted by Ragingwolf51
Lous short stick with a Hurst shifter. It's so nice. Can be a little notchy at times, but that is expected.
i went with a HURST billet pro shifter, 2" shortened/angled stick... my shifts are INSANELY short and i LOVE it.. i couldnt imagine ever driving the car without a short shifter again.
Originally Posted by LostCauseZ06
i went with a HURST billet pro shifter, 2" shortened/angled stick... my shifts are INSANELY short and i LOVE it.. i couldnt imagine ever driving the car without a short shifter again.
HAVE U TRY THE B&M???
IS THE HURST BETER ????
Got the same thing fordeater. Works like a charm. Take 2 helped me out a few weeks back when I almost had a wreck and he was there (before we officially met) He was lookin at the Lou short stick and was thinkin how the hell did I get the shifter so short! I will never go back to a regular shifter.
Or you could just cut it too...
Or you could just cut it too...
I am planning on getting a Pro 5.0, but I haven't decided on if I should get a LSS or not. Is the stock stick on the Pro 5.0 really that big? Cause if I do get a LSS I don't want my shifter to be pretty much inside the shift boot.
Anyone have pics of the pro 5.0 with LSS and ones without??
Anyone have pics of the pro 5.0 with LSS and ones without??
12 Second Club
Joined: Sep 2005
Posts: 4,273
Likes: 0
From: Bucks County, Pa.
Originally Posted by Ashish
I am planning on getting a Pro 5.0, but I haven't decided on if I should get a LSS or not. Is the stock stick on the Pro 5.0 really that big?
TECH Enthusiast
Joined: Nov 2001
Posts: 662
Likes: 3
From: Queens, NYC and sometimes Orlando
Originally Posted by camarosslover21
do the B&M come with the short stick or do you have to get it seperately??
The 2nd Gen B&M's come with a 1 piece stick that's pretty short as is....
The older 1st Gen B&M's had a 2-piece stick that you could replace with an LSS, but the result is about the same (the LSS adds a bit more angle to it though)
I've had just about every shifter combo you could imagine in my T/A (B&M 1 & 2, Kirban, Hurst Comp, Hust Billet, etc., etc., etc.) and the best by far is the Power Tower + LSS + Hurst Leather "H" ****
The Power Tower (Pro 5.0) has the highest pivot point of all the aftermarket shifters, so even though the stick may not sit the lowest in the console, it gives you the shortest throw possible
Rick