LS1TECH - View Single Post - Those interested in Magnuson kits for F-body, step inside

DanZ28 · 11-04-2006, 05:34 PM

Looks like there is only around 7.5" or less cleance before hitting the metal part of the cowl. Stock intake is about 6" and there is less than 1.5" from my FAST to the cowl. You might be able to fit a KB if you hack up the cowl pretty good.

Is it possible to lower the engine another .5" via a custom motor mount, or is the front K-frame bar in the way? If so, could you get away without cutting anything for the magi?

Nine Ball, on your second setup, can you go to 9 psi? What kinda number would you get if so?

BTW Ed, Nice setup!!

Dan

11-04-2006, 05:34 PM	#96
DanZ28 10 Second Club Trader Rating: 5 Join Date: Nov 2001 Location: Cali/Bay Area Posts: 3,358	Looks like there is only around 7.5" or less cleance before hitting the metal part of the cowl. Stock intake is about 6" and there is less than 1.5" from my FAST to the cowl. You might be able to fit a KB if you hack up the cowl pretty good. Is it possible to lower the engine another .5" via a custom motor mount, or is the front K-frame bar in the way? If so, could you get away without cutting anything for the magi? Nine Ball, on your second setup, can you go to 9 psi? What kinda number would you get if so? BTW Ed, Nice setup!! Dan __________________ *New Setup = Money Pit from hell!*