View Poll Results: which one would you choose for the applaication
ls7 clutch
36
45.57%
Centerforce Dual Friction
7
8.86%
ram Powergrip HD
17
21.52%
spec stage 2 clutch
3
3.80%
spec stage 3 clutch
16
20.25%
Voters: 79. You may not vote on this poll
vote for which clutch i should get
Thread Starter
TECH Fanatic
Joined: Jan 2006
Posts: 1,050
Likes: 0
From: reading,pa
vote for which clutch i should get i need help picking which clutch i should get. im only going to run a 100 shot on a 01 t/a its stock. the car is used for dd and will be taken to the track a little bit. just need somthing that will hold and not need to be changed in like 6 months
I had a spec stage 3 and it crapped out on my 382 rwhp car never having run anything stickier than stock tires and stock rear end. I have since installed the LS7 and it takes everything I can throw at it without a chatter or unusual noise. I will be installing a 12-bolt and some drag radials and have no worries about the clutch at all.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo I upgraded the slave cylinder when I went LS7, not sure if you have to or not, but that's what the shop did. I'm putting 382 to the wheels. The clutch has about 6000 miles on it and 12 or so track passes on it and it feels like it did brand new. It's never slipped, even the one time I launched on a set of ET Streets.
I plan on giving the fidanza a try (same people who make the AL flywheels) ive had good customer service experiences with them in the past and want to see what their clutches are about.
On The Tree
Joined: Mar 2004
Posts: 190
Likes: 0
From: Maine
Originally Posted by fuseone
i need help picking which clutch i should get. im only going to run a 100 shot on a 01 t/a its stock. the car is used for dd and will be taken to the track a little bit. just need somthing that will hold and not need to be changed in like 6 months
TECH Resident
Joined: Jan 2006
Posts: 991
Likes: 0
From: harrisburg, pa
Originally Posted by Shockwave179
I've heard good things about the Ram Powergrip..
Curious how much would the LS7 setup be?
Curious how much would the LS7 setup be?
http://www.ls1speed.com/catagory.cfm...y=Transmission
actually here are exact prices
399.99 and 204.99... you really cant beat it and you know z06s are putting down 460rwhp stock with 20 or so less tq and i like the idea of having the stock feel and slip
TEXTRALIA OZ700 with steel billet flywheel.. make sure you get a slave cylinder and a master cylinder. those ******* NEED to be replaced. dont make the same mistakes as i did.
