stock Z - 1st dyno
stock Z - 1st dyno well, i've had the camaro for 1 month now and finally got with my buddy, left work a little early and headed to the dyno.
the car is a bone stock, including crappy paper air filter, 2001 camaro z28 M6 with 51k miles.
in case you can't read the numbers on the bottom of the graph, 304 hp and 331 ft/lbs.
i made 3 pulls and all numbers were consisent!
what do you guys think??
spend the money on suspension and better tires and wait on motor mods??
tony
the car is a bone stock, including crappy paper air filter, 2001 camaro z28 M6 with 51k miles.
in case you can't read the numbers on the bottom of the graph, 304 hp and 331 ft/lbs.
i made 3 pulls and all numbers were consisent!
what do you guys think??
spend the money on suspension and better tires and wait on motor mods??
tony
looks about right for stock car.dynoed mine tonight to 2000 model ss right now got QTP lt and LID only on ls1 it did 331 HP and 350 TQ.looks like you are ready to start bolting stuff on.
Originally Posted by vatechguy3
the car is a bone stock, including crappy paper air filter, 2001 camaro z28 M6 with 51k miles.
in case you can't read the numbers on the bottom of the graph, 304 hp and 331 ft/lbs.
in case you can't read the numbers on the bottom of the graph, 304 hp and 331 ft/lbs.
Wow those are impressive numbers for a stock car. It's actually on the high side. I dunno if you should really opt for suspension parts. It all depends on what you want to do. I tried to make my car an all around performer, but I gotta admit that it still doesn't handle all that well.
Trending Topics
Good numbers and very strong torque down low. FWIW there's nothing wrong with a paper filter...that's what I use and plenty of other people on here too. I don't see the point in spending $50 for a K&N to gain a HP.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
TECH Resident
Joined: Jan 2002
Posts: 896
Likes: 0
From: Picatinny Arsenal, NJ
Originally Posted by Red99TA
Good numbers and very strong torque down low. FWIW there's nothing wrong with a paper filter...that's what I use and plenty of other people on here too. I don't see the point in spending $50 for a K&N to gain a HP.
Originally Posted by Red99TA
Good numbers and very strong torque down low. FWIW there's nothing wrong with a paper filter...that's what I use and plenty of other people on here too. I don't see the point in spending $50 for a K&N to gain a HP.
Originally Posted by mcamarols1
wow u guys made this into a paper filter vs. k&n filter thread, good numbers bro, i made 333whp and 350wtq w/ LT,ORY, Lid, through a 12bolt and 3.73's
That's my fault...I didn't mean to stir the pot. I don't even have a MAF anymore so the oil theory isn't why I use paper.