Livernois Motorsports Stage 2 L92 Heads! READY TO GO!!
Thread Starter
LS1TECH Sponsor
Joined: Nov 2006
Posts: 139
Likes: 0
From: Downriver
Livernois Motorsports Stage 2 L92 Heads! READY TO GO!! In Stock Ready to Ship!!!!!
CNC Ported Stage 2 L92 Cylinder Heads
New GM L92 casting
5 axis CNC machined
Fully assembled
Intake Flow Rate 360 CFM
Exhaust Flow Rate 245 CFM (264 CFM w/ 3/4" Pipe)
Manley Stainless 2.160 Intake Valves
Manley Stainless 1.590 Exhaust Valves
GM Valve Seals, Retainers, and Locks
Comp 918 single coil valve springs good to ~ .625 lift
No core required
Seen here on our website-
http://www.livernoismotorsports.com/...t.phtml?p=1534
$1,795.00 Pair
For ordering please call 313-561-5500. Dave and Matt in parts will take care of you!
Thank you,
Chad @ Livernois Motorsports
CNC Ported Stage 2 L92 Cylinder Heads
New GM L92 casting
5 axis CNC machined
Fully assembled
Intake Flow Rate 360 CFM
Exhaust Flow Rate 245 CFM (264 CFM w/ 3/4" Pipe)
Manley Stainless 2.160 Intake Valves
Manley Stainless 1.590 Exhaust Valves
GM Valve Seals, Retainers, and Locks
Comp 918 single coil valve springs good to ~ .625 lift
No core required
Seen here on our website-
http://www.livernoismotorsports.com/...t.phtml?p=1534
$1,795.00 Pair
For ordering please call 313-561-5500. Dave and Matt in parts will take care of you!
Thank you,
Chad @ Livernois Motorsports
Last edited by Chad@LivernoisMotors; Jan 30, 2007 at 01:41 PM.
These heads are ready, however we sold all of the heads in the photo within two days and don't have any assembled sets ready to ship. We have more running on the machine now.
Regards,
Rick LeBlanc
Livernois Motorsports
Regards,
Rick LeBlanc
Livernois Motorsports
Last edited by LivernoisMotorsports; Feb 22, 2007 at 10:14 AM.
Teching In
Joined: May 2006
Posts: 32
Likes: 0
From: Michigan
Originally Posted by FRDnemesis
Are these heads actually ready to go or not? I talked to someone on the phone the other day and he said the CNC program was not even complete.
We are out of stock on heads and have some more being CNC'd now. We have had a program for a while now. Be assured that the heads are real. I have a set.
Originally Posted by FRDnemesis
Are these heads actually ready to go or not? I talked to someone on the phone the other day and he said the CNC program was not even complete.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
i hear livernois has something in the works though for a better intake 