Please list your SBC/BBC Project here!
Teching In
Joined: Apr 2007
Posts: 24
Likes: 0
From: Don't be Scurred...It's only a Camaro
I have a 91 camaro RS with a 383 stroker, blown with an F1-R procharger.
ive had the car for about 5 years, and it ran 11.8 on the motor back in the day, just started really leaning on the blower setup.
It's got a callies crank, manley 4340 rods, Je pistons, AFR 210CC race ported heads, all comp cams valve train with a solid roller 262/272 and .631 lift, intercooled, meth injected, with a tremec TKO 600 trans, and a moser 12 bolt with 33spline axles......and a bunch of other stuff lol
ive had the car for about 5 years, and it ran 11.8 on the motor back in the day, just started really leaning on the blower setup.
It's got a callies crank, manley 4340 rods, Je pistons, AFR 210CC race ported heads, all comp cams valve train with a solid roller 262/272 and .631 lift, intercooled, meth injected, with a tremec TKO 600 trans, and a moser 12 bolt with 33spline axles......and a bunch of other stuff lol
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
i have a little project almost completed. about to pick up a edelbrock 750 carb for it, and after that, all i have left to do is replace the master cylinder and time it. it is a mild build 355 with a hydraulic flat tappet cam (.530-.540ish lift) with gm heads, and a holley street dominator intake. also has hooker l/t headers with no cats, true duals, and flow 40's dumped before the axle. this is going in my 78 nova, witch at full weight weighed in at 3490 with me in it (180 lbs) and a half of a tank of gas. it is original cream colored for now, but we will be laying down a black basecoat shortly, with a dark red sprayed on top of it (unless i change my mind again 
ran 15.7's on the beat up junkyard stock 350, so we will see what it does with some 275-50-15 drag radials and the new motor, then will be getting gears and a locker unit 
ran 15.7's on the beat up junkyard stock 350, so we will see what it does with some 275-50-15 drag radials and the new motor, then will be getting gears and a locker unit Last edited by 78novacaine; May 28, 2007 at 12:38 PM. Reason: im a retard
Guest
Posts: n/a
468 BBC, ran 10.4@136 unknown 60 and a 10.7@136 with a 1.8 60.
Out of the box holley intake and aluminim bow tie heads on a 300 shot and near stock suspension, belt driven water pump, all 80's technology. Car ran BOTTOM 11's on the motor spinning some.
Having the heads and intake race ported, cam matched, suspension.
Car is a fully loaded 83Z with 26k original miles.
Out of the box holley intake and aluminim bow tie heads on a 300 shot and near stock suspension, belt driven water pump, all 80's technology. Car ran BOTTOM 11's on the motor spinning some.
Having the heads and intake race ported, cam matched, suspension.
Car is a fully loaded 83Z with 26k original miles.
Teching In
Joined: May 2007
Posts: 5
Likes: 0
Sbc. All Motor ! ! ! 440" sbc, Dart block,eagle crank 4", 6.125 rods, w/9" deck, custom CP pistons 15.7:1, Protopline Raised Runner 256cc Heads 23*, Jesel 1.7 shaft rockers, Dart 4500 manifold, AED 1240cfm Dom., Comp. Cams special grind (.800 lift ), jesel belt drive, w/front mount distributer drive, aerospace vacuum pump, csr w/p, stef's oil pan, Lemon 2" headers, Mufflex 4" oval w/ Spintech mufflers, 8"- 6,000 stall -Lupo, th 400, 12bolt 4.30's, cars weighs 3025lbs. w/ driver, best to date 9.19 @148 w/150ft. wheelstand, car will go in the high 8's. Thanks. JR.
Staging Lane
Joined: Oct 2006
Posts: 95
Likes: 0
My BB Chevy Coupe Deville Well, i started off in the Chevy world and have always had it in my blood...strayed away to the Cadillac power plant for a while and here i am again for good! My ride began life as a daily driver 78 Coupe Deville and has spiraled out of contol to what it is today. Here r some specs fellas..... Its got a 14 to 1 540" rat under the hood, no power adders, no scoop. Dart Big "M" block, 325 Pro 1 heads, Eagle crank and rods, SRP pistons, Jesel S/S rockers, Moroso pan & pump, Cam Motion custom Rollers, Morel lifters, Edelbrock Super Victor with an 150 Dominator on Methenol. Home built T400 with a Rosler brake, 3500 10" converter, 29x11 slicks and 3.70 gears. The car has a full interior, pwr windows/locks/trunk release. Its run an untuned best of 9.85 @ 135 mph with 1.38 60ft times. I've had to slow it down to 10 flat to run my bracket class so i havent really seen what it can do with some tuning. More to come.......
On The Tree
Joined: Nov 2004
Posts: 199
Likes: 0
Originally Posted by JR Newman
440" sbc, Dart block,eagle crank 4", 6.125 rods, w/9" deck, custom CP pistons 15.7:1, Protopline Raised Runner 256cc Heads 23*, Jesel 1.7 shaft rockers, Dart 4500 manifold, AED 1240cfm Dom., Comp. Cams special grind (.800 lift ), jesel belt drive, w/front mount distributer drive, aerospace vacuum pump, csr w/p, stef's oil pan, Lemon 2" headers, Mufflex 4" oval w/ Spintech mufflers, 8"- 6,000 stall -Lupo, th 400, 12bolt 4.30's, cars weighs 3025lbs. w/ driver, best to date 9.19 @148 w/150ft. wheelstand, car will go in the high 8's. Thanks. JR.
Big Block C10 I have a close to mint 86 C10 with a built 468ci motor. Its still in the works...motor is complete carb to pan...h-beam rods, stock crank, hyper pistons 10.5-1comp, cast 049 heads with stainless 2.19/1.88 valves completely worked by Max Long, 1.7 stainless rockers, comp valve train. Highrise single plane Holley intake with a demon race 750cfm carb.
Behind the motor I have a 700r, 3500 stall hooked to a 12bolt (that needs gears!)
Now I just need time and some help to get it running! Any volunteers
I will be in this section more often...good stuff!
Behind the motor I have a 700r, 3500 stall hooked to a 12bolt (that needs gears!)
Now I just need time and some help to get it running! Any volunteers
I will be in this section more often...good stuff!
1980 trans am. TTP dropped in a gmpp zz383 crate engine, edelbrock performer rpm intake, ported intake runners on aluminum vortec heads, street avenger 770 cfm carb, removed a/c, long tube hedmans, hedman x pipe, custom exhaust with dynomax mufflers, hughes performance th350 trans, hurst quater stick, electric fuel pump set up, full MSD ignition with 6AL box, ladder bars, no rear sway bar, new rear shocks, subframe connectors and threw a few autometers in.
so far, as of today, that whole mess runs. on august 27th it will be track tested
and in a few miles dyno tuned
more to come
so far, as of today, that whole mess runs. on august 27th it will be track tested
and in a few miles dyno tuned
more to come
Registered User
Joined: Jul 2007
Posts: 1
Likes: 0
From: Dayton, Ohio
Lookin' good everybody! I've currently got a 1986 Camaro hardtop rolling chassis and a 454ci bbc that I plan on stuffing in it. Nothing really done to it right now, but the winter will definately be full of work to get her done in time for spring.