PBT Special Front & Rear Drilled Slotted Rotors Hawk Pads 269 Shipped
how do I decide if I want the HPS or Ceramic?
they will be going on a 4,000+lb GTO (that runs mid 11's) and stops hard at the track...
I also Auto-X the car, and want to get into road racing.
I also drive this car on the street
BTW, my stockers are warped from bringing the car down from 120mph in the 1320
they will be going on a 4,000+lb GTO (that runs mid 11's) and stops hard at the track...
I also Auto-X the car, and want to get into road racing.
I also drive this car on the street
BTW, my stockers are warped from bringing the car down from 120mph in the 1320
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Thanks for the response, everyone! I sold just out of the rotors I made for you guys. Some of you should be getting your rotors in the next day or so, let me know what you think!
I'm definately doing this again, and soon! So If you didn't get in for this round you'll have another chance here real quick.
Oh, and we can still take regular orders over the phone if you just want to do one axle at a time or you're looking for parts to fit a different application. I'll have to charge shipping of course, and I won't be able to ship as quickly because I make them to order, but I'll still give you a screaming deal on the parts!
Like up2nuthin's friend says, The HPS Are definately a higher performing compound. It's a carbon pad that takes the heat better than the ceramics and has more bite, but it does produce more dust and a will have a slightly shorter life span in comparison.
The ceramics are a harder compound and produce a lighter, more transparant dust that is less noticable on your wheels. If ultimate performance isn't a concern, ceramics are a great pad to choose. Either way, you're light years ahead of the factory pads.
If anyone had a hard time getting through on the phone, let me apologize for that. I man the phones alone and it's difficult to take care of everyone immediately (in fact, I'm still returning calls from yesterday right now) but between the phones and PM's I think we got everyone handled!
And thanks again to everyone who ordered. Your buisness means alot to me an I'm looking forward to helping everyone else who wants to put PBT brakes on their cars.
I'm definately doing this again, and soon! So If you didn't get in for this round you'll have another chance here real quick.
Oh, and we can still take regular orders over the phone if you just want to do one axle at a time or you're looking for parts to fit a different application. I'll have to charge shipping of course, and I won't be able to ship as quickly because I make them to order, but I'll still give you a screaming deal on the parts!
Originally Posted by KrautBurner
how do I decide if I want the HPS or Ceramic?
The ceramics are a harder compound and produce a lighter, more transparant dust that is less noticable on your wheels. If ultimate performance isn't a concern, ceramics are a great pad to choose. Either way, you're light years ahead of the factory pads.
Originally Posted by up2nuthingud
tried to order today by phone. no answer and no call back. is it easier to do via pm?
And thanks again to everyone who ordered. Your buisness means alot to me an I'm looking forward to helping everyone else who wants to put PBT brakes on their cars.
Originally Posted by PBT Brakes
This offer will end one month from the day we post it.
Performance Brake Technologies
Phone: (951) 345-7279
Fax: (951) 345-7237
Email: Performancebraketech@yahoo.com
Phone Hours
Monday thru Friday 9AM-4PM (Pacific Time)
Saturday Thru Sunday CLOSED
Originally Posted by 99Hawk262
So you'll still honor the $269.00 shipped until October 6th, correct. I have money in hand and tried to place an order two days ago but never recieved a PM back. I am ready to purchase right now at this price. Please let me know ASAP!
Originally Posted by PBT Brakes
Today we are pleased to announce a Brake Kit special for all LS1TECH members. We are offering the special with limited stock as a trial run for our product on this Forum...
And FYI, We accept phone orders for most makes and models daily. If you need cool disc's for your wife's Infiniti or Mercedes, give me a call and I'll set you up!
We're working on building another special RIGHT NOW so stay tuned!
I got mine today. Didn't compare them to the stock ones yet because the pads aren't here yet so I didn't take the car apart.
My honest opinion, and maybe I'm a bit ****
The fronts aren't mill balanced like Centric says all their rotors are, theres a weight in the fins of one.
AND Centric says all their rotors are double disc ground, the rears are definitely not. The rears are thicker than new standard rotors and are center split castings. Which are good things I guess. Why are they not double disc ground?
My honest opinion, and maybe I'm a bit ****
The fronts aren't mill balanced like Centric says all their rotors are, theres a weight in the fins of one.
AND Centric says all their rotors are double disc ground, the rears are definitely not. The rears are thicker than new standard rotors and are center split castings. Which are good things I guess. Why are they not double disc ground?
Last edited by 8a8mfh; Sep 13, 2007 at 06:04 PM.
THANKS PBT. 
Originally Posted by gr8one99SS
so will the package still be the same price when you recieve the next set of pads?
yes the kit price will stay the same for the time being. customer service is out goal and thank you also for the compliment.
Brock