Here are the images. Click on the image to see it larger.
(I don't have any on-car or lit-up pics.)
The socket and clear bulb are for fitment only (I only bought one, the picture is spliced). The actual socket I would use is the original on the car and an amber bulb. The stock socket unfortunately appears to sit the bulb further into the housing than the replacement socket that I used for testing. The bulb still fits. Its just about 50% closer to the front glass than what you see in the pics.
The only part of that fog light kit that I would have used is the actual bare glass/metal housing. Everything else (including the black back plastic) would not have been used.
The clear ring in the pic of the bulb connector is a plexyglass ring I made to increase the thickness of the seat to give a better seal since the back of the housing is thin metal instead of the thick plastic for which this socket was intended. The white ring is the foam gasket that came with the socket.