working on 67nova with twins and dual fuel, lots of pics.
Thread Starter
single digit dreamer
iTrader: (6)
Joined: Mar 2002
Posts: 9,757
Likes: 4
From: omaha ne
working on 67nova with twins and dual fuel, lots of pics. i thought i posted up on this over here but i can't find the thread.
we are just working a few hours a week on it and it is coming along nicely. we are really trying to make something that looks cool unlike the fairmont where the goal was fast and cheap. this is still on the cheap side but not super cheap like that car. i think it is going to look pretty mean when finished.
here is the complete gallery >> http://www.neufamily.org/images/67novagallery/
and a few of the better pics of the car. we picked it up cheap as a roller.
we are going to run an emspro wich is a juiced up megasquirt. 12 injectors. 4 primary units in the elbow and 8 in the intake. the 4 in the elbow will have pump gas and run the car most of the time and the 8 in the intake will probably run meth but may just be some kind of race fuel. the emspro can transition from one set of injectors to the other once the boost comes on.
for starters it will be a stock 6.0 other than an ls6 cam and good springs. a pair of sc61's for turbos. we want to push this set up and see what we can do with it. then down the road goto a built motor and some bigger turbos
that elbow is pretty sweet. got that from arron at intakeelbows.com. haven't decided on a converter yet but we will be running a 4l80e.
we are just working a few hours a week on it and it is coming along nicely. we are really trying to make something that looks cool unlike the fairmont where the goal was fast and cheap. this is still on the cheap side but not super cheap like that car. i think it is going to look pretty mean when finished.
here is the complete gallery >> http://www.neufamily.org/images/67novagallery/
and a few of the better pics of the car. we picked it up cheap as a roller.
we are going to run an emspro wich is a juiced up megasquirt. 12 injectors. 4 primary units in the elbow and 8 in the intake. the 4 in the elbow will have pump gas and run the car most of the time and the 8 in the intake will probably run meth but may just be some kind of race fuel. the emspro can transition from one set of injectors to the other once the boost comes on.
for starters it will be a stock 6.0 other than an ls6 cam and good springs. a pair of sc61's for turbos. we want to push this set up and see what we can do with it. then down the road goto a built motor and some bigger turbos
that elbow is pretty sweet. got that from arron at intakeelbows.com. haven't decided on a converter yet but we will be running a 4l80e.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
I'm digging the longroof...
You're pretty much doing the same thing I am with my 70' Nova, so needless to say, I'm subscribed.
Good luck with it. I can't wait to see some videos.
You're pretty much doing the same thing I am with my 70' Nova, so needless to say, I'm subscribed.
Good luck with it. I can't wait to see some videos.
Why no intercooler? Thread Starter
single digit dreamer
iTrader: (6)
Joined: Mar 2002
Posts: 9,757
Likes: 4
From: omaha ne
they sell the elbows lots of places and they are cheap. we got this stuff at mcmaster.com. the little ones were something like $7 each and are thick 304 stainless.
got some hole saws and die grinder tips from the same place, all about 1/2 the price of local stuff. look at the entire gallery if your interested in how it went together.
got some hole saws and die grinder tips from the same place, all about 1/2 the price of local stuff. look at the entire gallery if your interested in how it went together.
Thread Starter
single digit dreamer
iTrader: (6)
Joined: Mar 2002
Posts: 9,757
Likes: 4
From: omaha ne
Teching In
Joined: Mar 2008
Posts: 24
Likes: 0
From: San Diego
what kind of turbos are you running? Are they going to be ball bearing? if no , then why not a BOV?
Thread Starter
single digit dreamer
iTrader: (6)
Joined: Mar 2002
Posts: 9,757
Likes: 4
From: omaha ne