Muffler flow and dB comparison, Hooker Maxflow & Bassani Real Street?

Reply Subscribe

Thread Tools

Search this Thread

Dec 6, 2003 | 05:38 PM

FAST LS1

Thread Starter

TECH Fanatic

iTrader: (2)

Joined: Jun 2002

Posts: 1,057

Likes: 1

From: Athens TN

True Dual Muffler flow and dB comparison, Hooker Maxflow & Bassani Real Street?

The results in HP order:
1.Flowtech Warlock (open) 374.2 hp/ 333.1 tq
2.Bassani Real Street 373.7 hp/ 333.8 tq
3.Hooker Maxflow 373.5 hp/ 333 tq
4.Borla XS 373.3 hp/ 332.6 tq
5.Magnaflow 372.8 / 332.5 tq
6.MAC 372.3 hp / 331.5 tq
7.Flowtech Afterburner 372.3 hp/ 330.1 tq
8.Hooker Aerochamber 372.1 hp/ 330.4 tq
9.Bassani 372 hp/ 333.5 tq
10.Spintech 371.6 hp/ 332.2 tq
11.Edelbrock Performer RPM 370.9 hp / 331.3 tq
12.Borla XR1 370 hp/ 334 tq
13.Flowtech Terminator 369.5 hp / 331.3 tq
14.Dynomax Ultra Flo 369.4 / 333.2 tq
15.Flowmaster 369.4 hp / 331.8 tq
16.Flowtech Warlock 366.3 hp / 325.3 tq
17.No muffs 365.2 hp / 330.1 tq

Sound Off in Quietest to Loudest (Decibels):

1.Borla XS, 80db at idle, 90db at 2,000 rpm, 110db at WOT.
2.Hooker Maxflow, 80db at idle, 90db at 2,000 rpm, 120db at WOT.
3.Magnaflow, 82db at idle, 91 at 2,000 rpm, 114db at WOT.
4.Flowmaster, 82db at idle, 93 at 2,000 rpm, 115db at WOT.
5.Flowtech Warlock, 83db at idle, 92 at 2,000 rpm, 112db at WOT.
6.Dynomax UltraFlo, 83db at idle, 94 at 2,000 rpm, 113db at WOT.
7.Borla XR1, 83db at idle, 96db at 2,000 rpm, 118db at WOT.
8.Bassani Street, 83db at idle, 96db at 2,000 rpm, 120db at WOT.
9.Edelbrock RPM, 84db at idle, 93db at 2,000 rpm, 118db at WOT.
10.Bassani Real Street, 84db at idle, 96db at 2,000 rpm, MAX. (120+db).
11.Flowtech Afterburner, 86db at idle, 94db at 2,000 rpm, 115db at WOT.
12.Flowtech Terminator, 86db at idle, 94db at 2,000 rpm, 119db at WOT.
13.Hooker Aerochamber, 87db at idle, 94db at 2,000 rpm, 114db at WOT.
14.SpinTech, 87db at idle, 97db at 2,000 rpm, 116db at WOT.
15.MAC, 87db at idle, 98db at 2,000 rpm, 119db at WOT.
16.No Muffler, 91db at idle, 103db at 2,000 rpm, MAX. (120+db).

http://forums.stangnet.com/archive/index.php/t-392314

The Hooker Maxflow made the best power while still being very quiet at idle/2000rpm, but nice and loud at WOT. The Bassani Real Street also made nice power without being too loud. Anybody have any feedback on these mufflers?

Last edited by FAST LS1; Dec 7, 2003 at 04:11 PM.

Dec 6, 2003 | 05:49 PM

foff667

LS1TECH Sponsor

iTrader: (2)

Joined: Jul 2003

Posts: 7,986

Likes: 3

From: Clermont, FL

suprising with no muffler or mufflers since it was i guess on a mustang it made the least amount of power...youd think just the opposite hmm.

Dec 6, 2003 | 07:52 PM

86 IROC

10 Second Club

iTrader: (14)

Joined: Mar 2002

Posts: 1,124

Likes: 2

From: FL

I have a 3" madrel bent cat back w/ a Hooker Max Flow Center In/Out muffler on it, previously I had a "dynomouth" cat back - I couldn't stand it. I'm hoping to get to the track soon and do some back to back testing. the "dynomouth and off road pipes lost power vs. the all stock exhaust, it pulled more trap speed, but was impossible to launch w/o massive tirespin or bogging. The new system seems better by the butt dyno, however that's just Internet banter & I prefer to post real results. What I can say for sure, I like my car much better. I no longer get headaches from the drone going to and from work. I get all kinds of compliments about how much better it sounds now. Not to mention I can actually hear my girlfriend talking to me when we ride togehter in the car. (Haven't decided if that's a good thing or not - the jury is still out on that one)

Dec 10, 2003 | 12:13 PM

FAST LS1

Thread Starter

TECH Fanatic

iTrader: (2)

Joined: Jun 2002

Posts: 1,057

Likes: 1

From: Athens TN

Quote:

Originally Posted by foff667

suprising with no muffler or mufflers since it was i guess on a mustang it made the least amount of power...youd think just the opposite hmm.

My only guess would be that they were testing these mufflers on an engine that was on an engine dyno. They might have had and H or X pipe coming off the headers and then they had the mufflers put on right after the H or X. They might have also just put the mufflers directly on the headers? Either way with pretty much open headers I could see those kind of results.

Dec 10, 2003 | 12:28 PM

Turnin'LT4

TECH Apprentice

iTrader: (1)

Joined: Jan 2003

Posts: 355

Likes: 0

From: Charlotte, NC

If they were running an x-pipe and they took off the mufflers then they would definily pict up alot of hp and tq. I have done back to back testing on my car and I dynoed open headers and then open x-pip and the open X averaged 30 lbs tq more over the entire powerband. I then put on my spintechs and i lost about 8 lbs tq. and 9hp.

Dec 11, 2003 | 10:40 AM

FAST LS1

Thread Starter

TECH Fanatic

iTrader: (2)

Joined: Jun 2002

Posts: 1,057

Likes: 1

From: Athens TN

So I'd assume they probably did the muffler comparisons right off the headers.
The test was done in 5.0 Mustang Magazine December 2002 issue (page 55) if anyone happens to have a copy and can clear this question up.

Dec 11, 2003 | 11:29 AM

mgreen

TECH Apprentice

Joined: Jan 2002

Posts: 362

Likes: 0

From: IL

Quote:

Originally Posted by FAST LS1

It was a chassis dyno. . . those are RWHP numbers from a Notchback w/ heads/cam and bolt-ons.

I think they lost hp w/ no mufflers becuz they didn't mess w/ the fueling to accomodate the new flow.

On another note, the Borla XS is my favorite. . . it was their favorite in the article too, and that's what I'd go w/ on a custom cat-back.

Mike
'98 Z
M6, hotcam, stock heads
12.1@117 3480lbs raceweight, 1750 DA

Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph

Verdad Gallardo

Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked

Pouria Savadkouei

Top 10 Most Powerful Chevy Trucks Ever Made!

Hennessey's New Supercharged Silverado ZR2 Has 700 HP

Verdad Gallardo

Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes

Verdad Gallardo

Awesome K5 Blazer Restomod Comes With C7 Corvette Power

Verdad Gallardo

10 Camaros You Should Never Buy

10 LS Engine Myths That Refuse to Die

Verdad Gallardo

Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0

Brett Foote

10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever

Verdad Gallardo

Jan 5, 2004 | 02:51 PM

SouthFL.02.SS

!LS1 11 Second Club

Joined: Apr 2003

Posts: 7,133

Likes: 2

From: Miami

Yes, very helpful. I used it when making my selection. Went with FlowTech Afterburners.

Jan 5, 2004 | 05:22 PM

#10

No Juice

TECH Addict

iTrader: (11)

Joined: Jan 2003

Posts: 2,502

Likes: 19

From: Minnesota Corn Fields

is the mustang a single muffler cat-back system or dual???

if it is single I wonder if the Borla XS single in/dual out would work good for the f-body and set it up to look like the Magnaflow???
or the magnaflow on the list- how does it compare to the magnaflow for the f-bodies?

any opinions on this??

Oct 25, 2007 | 12:36 AM

#11

Tyler_LS1

12 Second Club

iTrader: (2)

Joined: Oct 2006

Posts: 137

Likes: 0

From: Oregon

I hate to bring up this old thread but what car was this tested on?

Oct 25, 2007 | 07:03 AM

#12

mgreen

TECH Apprentice

Joined: Jan 2002

Posts: 362

Likes: 0

From: IL

I said:

Quote:

It was a chassis dyno. . . those are RWHP numbers from a Notchback w/ heads/cam and bolt-ons.

btw, nice to see I still get notifications on replies.

Mike
2007 STI
2006 Daughter
2004 Murano
2004 Daughter

Dec 30, 2007 | 09:19 PM

#13

kicker175

Registered User

Joined: Dec 2007

Posts: 1

Likes: 0

I know this is an old thread but i'm looking to get some mufflers. What I was wondering was according to those figures, mainly the straight through designs are quieter than the chambered mufflers besides an open pipe. How is that? I figured that with the straight through design and more flow, the sound would be louder. Why is this not true?